For angles and straight cuts

The VK 370 ARM proposal for angles and straight cuts, configurable with different kind of loader and discharge systems.

Controlled by a NC that allows to program different lengths and angles sequences, with automatic calculation for minimum loss of scrap in the angle changing between two consecutives different pieces.

  • Axes moved with servomotors
  • Trim device with encoder
  • Deceleration ramp to expulse the rest bar
  • HMI touch 10”
  • Alarms messages and diagnostic pages
  • Pieces counter for each kind of pieces absolute and partial
  • Electronic blade protection with adjustable limit and delay of intervention
  • Different unloading system: front , back and different maximum length

TECHNICAL DATA

  • Cutting capacity min/max D.8/100 mm
  • Disk diameter min/max 250/370 mm
  • Loader capacity 4000 kg/ 6000 mm
  • Minimum lenght 5 mm
  • Blade speed rotation 50/100 (10/120) rpm
  • Blade motor power 3.5 ( 5.5) Kw
  • Maximum vices opening 140 mm
Scie circulaire Maco VK 370 ARM Scie circulaire Maco VK 370 ARM Scie circulaire Maco VK 370 ARM Scie circulaire Maco VK 370 ARM Scie circulaire Maco VK 370 ARM Scie circulaire Maco VK 370 ARM Scie circulaire Maco VK 370 ARM

A SECURE INVESTMENT WITHOUT COMPROMISE ON QUALITY

Productive

  • Deceleration ramp to expulse the rest bar
  • Pieces counter for each kind of pieces absolute and partial
  • Different unloading system: front , back and different maximum length

Accurate

  • Axes moved with servomotors
  • Trim device with encoder
MACO, ITALY

MACO S.r.l. was founded in 1982 as producer of tube circular sawing machines, later expanded the range to band sawing machines for bars and metal tubes.

The increment of experience and market changements has forced the evolution of the models: starting from manual and semiautomatic until arriving to produce cutting lines.

Testimony

Your technician did a PRO job, very professional on the installation and training, the employees really appreciated the training 10/10 !

Alain D.

Alain D.

We are 150% satisfied with our purchase of an HSG 3KW cutting table. The machine exceeds our expectations in terms of cutting quality and machine. Garant Machinery team handled everything from A to Z. The training and installation was done in less than 3 days and in 1 week our production was operational.

M. Morin

Our team has been doing business with the Garant Machinery for three years now. The folding machines are essential to our production, their use is simple and safe. We use them daily for the fabrication of specialized pieces. We are satisfied with the quality. Whether for the acquisition of the machines or the after sale service, a representative is always available to answer us.

Distribution Mega Aluminium’s team

Michaël Bourret

When we call we get great service. Our needs are 100% met. Thank you Garant Machinery.

M. R. Pichette

Always had good service and when you call, you know you’re going to get great support.

M. G. Ouellet

Fantastic machine, I never made a better purchase than this. I used it quite a bit and I can tell you it’s a workhorse.

M. J. Smith

We are very satisfied with the equipment we purchased. The few adjustments that were necessary during the start-up were done quickly with courtesy and professionalism.

C. Caron

We appreciate Garant’s way of doing things and handling customers. You and your team listen to the client and are committed to working in partnership and mutual respect.

É. Tremblay

Since we have been doing business with you, you are reliable and the service is top notch.

M. N. Régimbald

We purchased a LAG G-TOP 185-3000 press brake to replace our 1988 Amada Promecam. Yves Garant and his team supported us very well in our decision making process. We had a major challenge to conciliate: need definition, technology evolution and budget. Garant Machinery sets itself apart with a wide range of products, exceptional technical expertise, a curiosity about the evolution of the market, very responsive from submission to after-sales service, and good customer service. Garant Machinery is an experienced business partner with whom we have done many projects in the past, and that we will consider in our future investments.

E. Buissières

I would like to thank Garant Machinery’s team for the excellent service in acquiring an uncoiler made in Italy. Throughout the entire process, from the selection of the manufacturer, the manufacturing process to the installation, everything was done according to our needs and criteria. All this while respecting the dates and our budget. Thank you.

É. Hamel

The installation of the folder went really well. You have a super installation team!!! Great professionalism and truly qualified.

R. Piquette